Hitachi 220H Bios Manual page 90

The following table shows description of menu items in the left side of those
windows.
Table 2-13: Drives menu items
Connector
Enclosure ID
Mode name
Vendor
Revision
Slot Number
Device Type
Connected Port
Media Errors
Pred Fail Count
SAS Address
Physical Drive State
Certified
FDE Capable
Max Device Speed
Link Speed
Temperature (Celsius)
Commisioned Hotspare
2-26
Menu items
Items in the table above can not be changed.

Media Errors and Pred Fail Count are cleared when the system

unit is powered off.
MegaRAID WebBIOS
Hitachi Compute Rack 210H/220H BIOS Guide
Description
Connector of the connected disk array controller board
ID number of the connected enclosure device
Disk mode name
Vendor name
Firmware version
Number of the slot installed
Device type
Port number of the connected disk array controller board
Number of detected media errors
Number of reported S.M.R.T warnings
SAS address
Status
Certification
With or without encryption function
Maximum speed at which a physical disk can operate
Link speed of an interface
Disk temperature
Enabled/disabled protection by hotspare