Hitachi HAS-WM06 User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Racks & Stands
  5. HAS-WM06
  6. User manual
Hitachi HAS-WM06 User Manual

Hitachi HAS-WM06 User Manual

Wall mount unit for projectors
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Wall mount unit for projectors
HAS-WM06
Model name
Thank you for purchasing a wall mount unit specially designed for Hitachi projectors.
Be sure to read this manual and the User's Manual supplied with the projector before use so you will know how to
change without prior notice.

Disclaimer

incorrect use or handling that exceeds normal operating limits.

Table of Contents

Disclaimer ................................................ 1
Table of Contents ..................................... 1
Safety Symbols ........................................ 1
Overview ................................................... 2
Installation Precautions .......................... 2
Tools needed for installation .................. 2
To the customer ....................................... 3
To service personnel ............................... 3
Routine Inspections ................................ 3
Contents of this package ........................ 4
Template sheet usage .............................. 6
Installation procedure ............................. 7
3 Attaching Adjusting block (D) .................... 8

Safety Symbols

The following symbols are used in this manual to help you use this product safely and correctly, and to prevent injury
to yourself and others or damage to property. Read through the safety instructions below so you can operate the
product correctly.
WARNING
CAUTION
This symbol indicates information that, if ignored, could result in serious personal injury
or even death due to incorrect handling.
This symbol indicates information that, if ignored, could result in personal injury or
physical damage due to incorrect handling.
Indicates a prohibited action.
This symbol is accompanied by text indicating an action that must not be taken.
Indicates a mandatory action.
This symbol is accompanied by text indicating an action that must be taken.
6
9 Attaching bracket (F) .................................11
0 Attaching projector ....................................12
! Connecting cables .....................................12
Adjustments ............................................14
$ Image adjustments ....................................15
Installing exterior parts ..........................18
^ Attaching the cable cover ..........................19
Adjustment precautions ........................ 20
Applicable models ................................. 22
1
...10
.................... 21

Advertisement

Table of Contents
loading

Related Manuals for Hitachi HAS-WM06

Summary of Contents for Hitachi HAS-WM06

  • Page 1: Table Of Contents

    HAS-WM06 Model name Thank you for purchasing a wall mount unit specially designed for Hitachi projectors. Be sure to read this manual and the User’s Manual supplied with the projector before use so you will know how to change without prior notice.

  • Page 2: Overview

    HAS-WM06 Overview This product is designed to mount a Hitachi projector on a wall. Installation Precautions Installation of this product requires special technical skills. Ask your dealer or service center (for details, see the User’s Manual supplied with the projector) to handle the installation work.

  • Page 3: To The Customer

    HAS-WM06 WARNING To the customer installation work. Note that Hitachi will accept no liability whatsoever for accidents or injuries resulting from an incorrect installation or improper use. when the projector is used. down or bend the arm resulting in injury or damage.

  • Page 4: Contents Of This Package

    HAS-WM06 Contents of this package Check that the items listed in the table below are included in this package. If any are missing, please contact your dealer immediately. (The fasteners (screws, etc.) required for wall mounting are not supplied with the wall mount unit.

  • Page 5: Base Bracket Attachment Diagram

    HAS-WM06 Base bracket attachment diagram Screen center Wall hole center Cable cover Screen center (*1) Screen thickness Unit: mm (inches) Sheet projecting distance table 16:10 screen (Full screen: Reference value for 1,280 × 800 pixel image.) Diagonal size (inches) mm (inches) mm (inches) mm (inches) mm (inches) mm (inches) mm (inches) mm (inches) 149(5.9)

  • Page 6: Template Sheet Usage

    HAS-WM06 Template sheet usage Determining location of wall holes Place the template sheet (P) where you want to project the image. 1 Vertical orientation: Align the top of the sheet with the upper edge of the image you want to project.

  • Page 7: Installation Procedure

    HAS-WM06 Installation procedure 1 Fasten the base bracket (center) (B) to the base brackets (side) (C) with the eight M4 x 8mm hex-head screws (J). Base bracket (sides) (C) Base bracket (center) (B) Base bracket (sides) (C) M4 × 8 hexagon head screws (J) (Eight places) If mounting the base bracket assembly on a wall, use anchor bolts.

  • Page 8: Extending The Arm Bracket (In)

    HAS-WM06 2 Loosen the fastening screw (in the location indicated by the arrow in the diagram below) and extend the arm bracket (IN). Attach the adjustment block (D) to the arm bracket (IN). Fastening screw Adjusting block (D) Arm bracket (IN)

  • Page 9: Installation Of The Vertical Adjustment Screw (L) Of The Arm

    HAS-WM06 4 Attach the M10 x 162mm arm vertical adjustment screws (L) to the base bracket assembly (A) up to the red mark. Arm assembly (A) Red mark Red mark M10 x 152mm Arm vertical adjustment screw (L) 5 Mount the arm assembly (A) on the base bracket assembly.

  • Page 10: Installation Of The Strut Cover Bracket (M)

    HAS-WM06 6 Pass the M10 x 194mm arm fixing strut screws (K) from under the base bracket (center) (B) and tighten them with a hex wrench (O) and fasten the arm assembly (A). (Two places) M10 x 194mm (Two places) M10 x 194mm 7 Fasten the strut cover bracket (M) with the M4 x 8mm hex-head screws (J).

  • Page 11: Removal And Storage Of Screws

    HAS-WM06 8 Remove the temporary mounting screws, and attach them to the base bracket (B) for storage. Remove the temporary screws (Two places). Attach to base bracket (B). 9 Attach the bracket (E) and the hook bracket enclosed with the projector to the projector using 5 M6 ×...

  • Page 12: Attaching Projector

    HAS-WM06 0 Mount bracket (E) from the direction of the arrow to the adjustment block (D). Tighten the three M5 x 8mm shoulder screws (N) and 1 M4 x 8mm hex-head screw (J). Adjusting block (D) Bracket (E) Projector M5 shoulder screws (N)

  • Page 13: Installation And Removal Of The Cable Clamp (S)

    HAS-WM06 @ Installation and removal of the cable clamp (S) Cable clamp (S) Hook bracket Cable clamp (S) Security bar To reuse the cable clamp, insert a slender object into the claw section as shown in the diagram to remove it.

  • Page 14: Adjustments

    HAS-WM06 Adjustments # Turn the projector on and project an image to make adjustments. #-1. Project an image, adjust the image settings and focus on the projector. * For details, see to the User’s Manual for the projector. #-2. Use the remote control to select a screen for making adjustments.

  • Page 15: Image Adjustments

    HAS-WM06 $ Adjust the image. $-1. Adjustment of image size. 1. Slide the arm forward and backward to adjust image size. Scale Adjustment screw, center Adjustment screw (hex-head screw) Align the center of the adjustment screw (hex-head screw) to the scale to adjust...
  • Page 16 HAS-WM06 $-2. Make a rough focus adjustment. For details, see the User’s Manual for the projector. Loosen fastening screws (1) to (4). Follow the steps below to turn the adjusting screws and adjusting knobs to adjust the image. (Green) (Red) (Blue) Use the included hex wrench (O).
  • Page 17 HAS-WM06 7. Fine adjustment of vertical position Turn the height adjusting screw to adjust the height. Supplied Allen wrench (O) See page 21 for details on adjustment range. $-4. Use the included hex wrench (O).

  • Page 18: Installing Exterior Parts

    HAS-WM06 Installing exterior parts % Procedure for installing exterior parts %-1. Attach the front cap (F) at the front end of the Arm bracket (IN). Hook the tabs on either side in the holes in the arm bracket (IN). Front cap (F)

  • Page 19: Attaching The Cable Cover

    HAS-WM06 ^ Attaching the cable cover ^-1. Fasten the cable cover (G) with the two M4 x 8mm hex-head screws (J). Cable cover (G) M4 × 8 hexagon head screws (J) (2 places) ^-2. Screw head Hole Fit the hole onto the screw head.

  • Page 20: Adjustment Precautions

    HAS-WM06 Adjustment precautions Bead-type screens with a high screen gain are not suitable for this projector. Use of a matte screen with a wide viewing angle and a gain of about 1.0 is recommended. Interaction between the screen pattern and LCD pixels may result in interference fringes (moiré). This is not a malfunction.
  • Page 21 HAS-WM06 Fine adjustment amount Description of Item Image movement (amount of projector movement) adjustment method Fine adjustment of ±5° page 15 horizontal position Fine adjustment of ±5° page 15 horizontal keystone Fine adjustment of ±5° page 15 vertical keystone Fine adjustment of ±50 mm (1.96 inches)

  • Page 22: Applicable Models

    HAS-WM06 Applicable models Supported Hitachi projector models Model Screen size Weight Projector model A LP-AW4001 Approx. 7.6kg 16:10 LP-AW3001 Approx. 7.4kg LP-AX3001 Approx. 7.4kg Wall mount unit HAS-WM06 Approx. 7.1kg...

Table of Contents