Starting system BIOS setup menu
1. Power on the system.
2. When Press <DEL> to enter SETUP is displayed in the top of the window
during the system unit boot, press DELETE key.
Entering SETUP... is displayed. Shortly after the Power on self test (POST) of
the RAID BIOS and the extension board BIOS installed in the system is
finished, the system BIOS setup menu starts up and the Aptio Setup Utility
will be displayed.
Figure 1-2: System BIOS setup menu starting window
When the OS has started before pressing the key, shut down the
OS and restart the system unit. See the documents attached to
your OS for shutting down.
Depending on the capacity of the memory boards in the system
unit, you may need to wait a couple minutes the system BIOS
setup menu will start.
System BIOS
Hitachi Compute Rack 210H/220H BIOS Guide
1-3