Starting Megaraid Webbios - Hitachi 220H Bios Manual

Starting MegaRAID WebBIOS

1. Power on the system unit.
2. When the following window is displayed, press Ctrl + H keys.
The MegaRAID WebBIOS is started.
LSI MegaRAID SAS-MFI BIOS
Version xx.xx.xx (Build xxxxxx xx, 20xx)
Copyright(c) 20xx LSI Corporation
HA –x (Bus xx Dev xx) MegaRAID SAS xxxxxxxxx
FW package: xx.xx.xx.-xxxx
x Virtual Drive(s) found on the host adapter.
x Virtual Drive(s) handled by BIOS
Press <Ctrl><H> for WebBIOS
The following windows will displayed when installed the RAID controller with
cache backup module. Press any key to continue.
Your VDs that configured for write-back are temporality running in
write-through mode. This is caused by the battery being charged, missing
or bad. Please allow the battery to charge for 24 hours before evaluating
the battery for replacement.
The following VDs are affected: X
Press any key to continue.
2-4
When the OS has started before pressing the key, shut down the OS
and restart the system unit. See the documents attached to your
OS for shutting down.
MegaRAID WebBIOS
Hitachi Compute Rack 210H/220H BIOS Guide