Controller Properties Submenus - Hitachi 220H Bios Manual

Controller properties submenu 1
Click Next in the Controller Information menu 2 window. The following
window is displayed.
The following table shows description of menu items in the window.
Table 2-7: Controller properties submenu 1 items
Menu items
Battery Backup
Set Factory Defaults
Cluster Mode
Rebuild Rate
4
BGI Rate
3
CC Rate
Reconstruction Rate
3
NCQ
Coercion Mode
S.M.A.R.T Polling
Alarm Control
2-14
1
Status of cache backup module
installation
2
Returning all the settings to their
defaults values
3
Setting the cluster mode
4 Priority of rebuilding
Priority of background initializing
Priority of consistency check
4
Priority of capacity expansion
Enabling or disabling the NCQ
command
5
Setting the capacity control for
the physical disk used for disk
array building
4
Setting the interval of S.M.A.R.T.
reporting
Sounding the buzzer on the
controller in the event of failure at
a connected device
MegaRAID WebBIOS
Hitachi Compute Rack 210H/220H BIOS Guide
Description
None / Present
Unchangable
[Disabled]
0 to 100 / [30]
0 to 100 / [30]
0 to 100 / [30]
0 to 100 / [30]
[Enabled] / Disabled
[None (using the entire capacity)] /
128MB-way (using a capacity as a
multiple of 128MB) / 1GB-way (using
a capacity as a multiple of 1GB)
0 to 65535 / 300 / [600]
[Disabled] / Enabled / Silence
Setting/display value