Hitachi 220H Bios Manual page 54

The following table shows description of menu items.
Table 1-27: ServerMgmt menu items
Menu items
Erase SEL
Reset BMC Web
Connection
POST Error Pause
BMC Action for SEL Full
BMC Action for IERR
BMC Action for Thermal
Trip
CATERR# to NMI
IPMI Object
Send Hardware
Configuration to BMC
Send Setup
Configuration to BMC
BMC network
configuration
* A value in square brackets, [ ], shows the default.
1-46
Selection*
[No]

Yes, On next reset

[No]

Yes,On next reset

[Enabled]

Disabled

Keep

[Refresh]

[NMI]

Hard Reset

No Action

Power Cycle

[No Action]

Power On

[Disabled]

Enabled

[Disabled]

Enabled

Disabled

[Enabled]

Disabled

[Enabled]

-
System BIOS
Hitachi Compute Rack 210H/220H BIOS Guide
Description
Sets to clear the event log data.
Sets to clear the BMC network settings.
Set to pause when errors occur during Power On
Self Test (POST).
Selects an action when the event log data has
maxed out.
Selects a BMC action when CPU error occurs.
Selects a BMC action when thermal trip occurs.
Sets a NMI when detected a CATERR.
Sets the IPMI to enable.
Sets to sending hardware configuration data to
BMC.
Sets to sending setup configuration data to BMC.
Displays the BMC network configuration
submenu.
See BMC network configuration for the details.