Bmc Network Configuration - Hitachi 220H Bios Manual

BMC network configuration

Place the cursor on an item to display or set, and press Enter.
Main Advanced
BMC network configuration
Enabled DHCP
IP address
Subnet mask
GateWay
Save Changes
Figure 1-30: BMC network configuration submenu
The following table shows description of menu items.
Table 1-28: BMC network configuration submenu items
Menu items
BMC network configuration
Enabled DHCP
IP address
Subnet mask
2
GateWay
Save Changes
Notes:
1 A value in square brackets, [ ], shows the default.
2 This item setting is detected automatically when Enabled DHCP is Enabled.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Chipset Server Mgmt
[Enabled]
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
[No]
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Selection
Disabled

[Enabled]

2
[xxx.xxx.xxx.xxx]

2 [xxx.xxx.xxx.xxx]

[xxx.xxx.xxx.xxx]

[No]

Yes, On next reset

Hitachi Compute Rack 210H/220H BIOS Guide
Boot Security Save & Exit
→←: Select Screen
↑↓ ：
Select Item
Enter ： Select
+/- ：
Change Opt.
F1 ：
General Help
F2 ：
Previous Values
F3 ：
Optimized Defaults
F4 ：
Save & Exit
ESC ： Exit
1
Sets to enable DHCP for BMC network.
Sets the IP address to BMC network.
Sets the subnet mask to BMC network.
Sets the gateway to BMC network.
Save change settings of BMC network, which
makes effect after the reboot.
System BIOS
Description
1-47