Hitachi 220H Bios Manual page 21

The following table shows description of menu items.
Table 1-6: Trusted Computing submenu items
Menu items
Configuration
TPM SUPPORT
2
TPM State
2
Pending operation
Current Status Information
NO Security Device
3
Found
4
SUPPORT TURNED OFF
TPM Enabled Status 2
2
TPM Active Status
2
TPM Owner Status
Notes:
1 A value in square brackets, [ ], shows the default.
2 This item is displayed when the TPM board (EQ7000-Y/EQ7000-R) is installed to the system unit and
TPM SUPPORT is set Enable.
3 This item is displayed when the TPM board (EQ7000-Y/EQ7000-R) is not installed in the system unit.
4 This item is displayed when the TPM board (EQ7000-Y/EQ7000-R) is installed in the system unit and
TPM SUPPORT is set Disabled.
Hitachi Compute Rack 210H/220H BIOS Guide
1
Selection
[Disable]

Enable

[Disabled]

Enabled

[None]

Enable Take

Ownership
Disable Take

Ownership
TPM Clear

-
-
-
-
-
System BIOS
Description
Sets the Trusted Platform Module (TPM) to enable.
Sets the TPM to use.
Sets the TPM to clear operation.
The TPM is not installed in the system unit.
The TPM is disabled.
Displays an operation status of the TPM.
Displays an active status of the TPM.
Displays an owner status of the TPM.
1-13