Hitachi 220H Bios Manual page 31

The following table shows description of menu items.
Table 1-12: SATA Configuration submenu items
Menu items
SATA Configuration
SATA Port0
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Mode
2
Serial-ATA Controller0
2
Serial-ATA Controller1
Notes:
1 A value in square brackets, [ ], shows the default.
2 This item is displayed when SATA Mode is set IDE Mode.
Hitachi Compute Rack 210H/220H BIOS Guide
1
Selection
-
Disabled

IDE Mode

[AHCI Mode]

Disabled

Enhanced

[Compatible]

Disabled

[Enabled]

System BIOS
Description
Displays the device information of connected to
SATA port.
SATA Port4 will display installed DVD-ROM drive.
Sets SATA mode.
Sets SATA controller0 to enable.
Sets SATA controller1 to enable.
1-23