Mitsubishi Electric MELSEC iQ-F Series Training Manual page 73

4.2
Differences Between [OUT] and [SET]/[RST]
This section describes the OUT and SET/RST instructions and the operation of a self-holding ladder.
4.2.1
The OUT instruction turns on a specified device when the input condition turns on, and turns off the device when the condition
turns off.
■Timing chart
4 SEQUENCE INSTRUCTIONS AND BASIC INSTRUCTIONS -PART 1-
4 - 4
4.2 Differences Between [OUT] and [SET]/[RST]
[OUT]
(Coil output)
X100
0
2
X100
Y170
Project name RB-1
Program name MAIN
Y170
END