(From the previous page)
4.
Click and move
the cursor!
5.
Drag to specify
the range!
6.
Click
7.
Click and move
the cursor!
8.
Click
the copy!
!
The copy is pasted on the
block above this block!
to paste
4.
Click and the move the cursor to the position
where a part of the ladder program is to be
copied.
5.
Drag the mouse to specify the copy range.
The color of the specified range is highlighted.
To easily specify the range in units of ladder blocks,
click the position where a step number is displayed
and drag the mouse vertically.
6.
Click
on the toolbar, or select [Edit] →
[Copy] ( + ).
7.
Click and move the cursor to a position on the
ladder block (any position on the block) where
the copy is to be pasted.
8.
Click
on the toolbar, or select [Edit] →
[Paste] ( + ) from the menu.
2 OPERATING GX Works3
2.9 Editing a Ladder Program
2
2 - 51