Mitsubishi Electric MELSEC iQ-F Series Training Manual page 65

2.9.3
Operating procedure
A ladder program to be created
X102 X100
Y170
X103
Adding or deleting a line with the key operation
In GX Works3, lines can be added or deleted with the  key + , , , or .
Users can draw a horizontal line from the cursor position to the position of the next contact, coil, or line by
pressing  +  +  or .
2 OPERATING GX Works3
2 - 46
2.9 Editing a Ladder Program
Deleting a line
1.
Click!
2.
Drag!
3.
The line is deleted!
4.
Press the Delete key!
This section describes how to delete a line in the
ladder program shown on the left.
Y170
Y173
Y172
1.
Move the mouse pointer close to the exiting
line, and click the displayed icon.
2.
Drag the icon along the line to be deleted.
3.
Release the left button of the mouse to delete
the line.
The line connected to "END" cannot be deleted.
4.
Press the  key to delete (
5.
Click [Convert] → [Convert] () from the
menu to convert the ladder program.
).
Y173