Mitsubishi Electric MELSEC iQ-F Series Training Manual page 113

6.1.3
Current value change of the device (T)
3.
Click!
5.
Checking with the demonstration machine
After entering the current value, press the  key and check that the value in the initial indication device (D1) changes to
1000.
With the same procedure, the current values of word devices other than the timer (T) can also be changed.
1.
Click!
Enter!
Set the CPU module to the RUN state before this operation.
1.
Select the "T0" cell on the ladder editor and click [Online]
"D20"
→ [Watch] → [Register to Watch Window] → [Watch
Window 1].
2.
"T0" is registered in the "Watch 1" window.
"D20"
3.
Right-click "T0" in the "Watch 1" window and click [Start
"D20" in
Watching].
4.
Watching of "Watch 1" starts.
5.
Enter "1000" in "Current Value".
can also be changed.
6 HOW TO USE OTHER FUNCTIONS
(D20)
D20
6.1 Online Test Function
6
6 - 3
MELFT