Mitsubishi Electric MELSEC iQ-F Series Training Manual page 38

Engineering tool settings
From the engineer tool, this is done on the "Specify Connection Destination Connection" window.
Select "Online"  [Current Connection Destination] .
(1) (1) (1)
(2) (2) (2)
(3) (3) (3)
Connection of the Ethernet cable
Hub
Use the [Find] button in the "PLC side I/F Detailed Setting of PLC Module". The IP address of the connected
CPU module can be searched and can be set to "IP Address".
1.
Select "Ethernet Board" for "PC side I/F"(1).
2.
Select "PLC Module" for "PLC side I/F"(2).
Input the CPU IP address or host name in the "PLC side I/F Detailed
Setting of PLC Module" screen as shown in the left figure.
In case of host name, set the name specified in the Microsoft

Windows hosts file.
3.
Double-click "No Specification" (3) on the "Specify Connection
Destination Connection" window to set "Other Station Setting".
Select an item appropriate to the operating environment.
1.
Connect a personal computer to the CPU module via a hub.
4 PROCEDURES BEFORE OPERATION
4.4 Connecting a Personal Computer
4

29