Mitsubishi Electric MELSEC iQ-F Series Training Manual page 48

2.4.3
Creating a ladder program with tool buttons
Operating procedure
3.
The symbol is displayed!
4.
Click and enter
the I/O number!
6.
7.
Click and enter
the I/O number!
2.
Press the
Enter key!
1.
Click and enter
the I/O number!
5.
Press the
Enter key!
The symbol is displayed!
8.
Press the
Enter key!
(To the next page)
1.
Click on the toolbar to open the ladder
input window, and enter "X102".
To cancel an incorrect entry, press the 
key.
2.
To confirm the entry, press the  key.
• Clicking the [OK] button also confirms the entry.
• Clicking the [Cancel] button also cancels the
entry.
X102
3.
The added symbol (
4.
Click on the toolbar and enter "X100".
5.
Press the  key.
X100
6.
The added symbol (
7.
Click on the toolbar and enter "Y170".
8.
Press the  key.
2 OPERATING GX Works3
2.4 Creating a Ladder Program
2
) is displayed.
) is displayed.
2 - 27