Mitsubishi Electric MELSEC iQ-F Series Training Manual page 52

4.11
Resetting the CPU Module
Reset the CPU module using the RUN/STOP/RESET switch located on the front of the CPU module.
Procedure
The following illustration is an example of the FX5U CPU module.
(1)
Operate the RUN/STOP/RESET switch with your fingers. Use of a tool such as a screwdriver may damage
the switch.
4.12
Executing the Program
Execute the program written to the programmable controller by using the RUN/STOP/RESET switch.
Procedure
The following illustration is an example of the FX5U CPU module.
(1)
1.
Set the RUN/STOP/RESET switch (1) to the RESET position for a
second or longer.
2.
Check that the ERROR LED (2) flashes for several times and turns off.
3.
Set the switch back to the STOP position.
(2)
1.
Set the RUN/STOP/RESET switch (1) to the RUN position.
2.
Check that the P.RUN (2) turns on.
(2)
4 PROCEDURES BEFORE OPERATION
4.11 Resetting the CPU Module
4
37