2.4.1
Creating a ladder program by entering devices and
labels
Operating procedure
3.
The symbol is displayed!
4.
Enter the I/O number!
6.
7.
2.
Press the
Enter key!
1.
Enter the I/O number!
5.
Press the
Enter key!
The symbol is displayed!
The symbol is changed!
(To the next page)
1.
Move the cursor to the position where a ladder
is added, and enter "X102". (When entering of
the number starts, the ladder input window
appears.)
To cancel an incorrect entry, press the
key.
2.
To confirm the entry, press the key.
• Clicking the [OK] button also confirms the entry.
• Clicking the [Cancel] button also cancels the
entry.
X102
3.
The added symbol (
4.
Move the cursor to the next position and enter
"X100".
5.
Press the key.
X100
6.
The added symbol (
7.
Select the symbol and press the "/" key to
switch the symbol with (
2 OPERATING GX Works3
2.4 Creating a Ladder Program
2
) is displayed.
) is displayed.
X100
).
2 - 21