Sony XDCAM HD PDW-HD1500 Operation Manual page 121

Item
M38: F-KEY For details, refer to the Maintenance Manual.
CONFIG
M380: HOME2
M381: PAGE8 ASSIGN
M382: PAGE8 NAME
M38F: NV-RAM
CONTROL
M3B: VANC RX M3B0: VANC RX
PARAMETER PACKET
Sub-item
1 LINE
2 DID
3 SDID
M3B1: LINE1 SEL
M3B2: LINE2 SEL
M3C: POWER SAVE CONTROL
M3D: DATE/TIME PRESET
M3E: USB MEMORY UTIL
M3F: FACTORY SETUP
M3: OTHERS: Other setting items
Setting
Assign a function menu item to page HOME2 of the function menu as a user
setting.
Assign a setup menu item to page P8 of the function menu as a user setting.
Specify the name of a setup menu item assigned with M381: PAGE8 ASSIGN.
Save the settings of M380 to M382.
For setting HDSDI VANC data input parameters
Notes
• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the
corresponding line in the second field (for example, if line 9 is selected, line 527
is also selected for VANC packet reception).
• Menu item M3B0 enables recording of one VANC packet when the selected line
contains any packets whose DID/SDID matches the value set with this menu
item.
• Up to four packets are recorded per each line regardless of the DID and SDID
for the VANC set with menu item M3B1 or M3B2.Menu items M3B1 and MSB2
enable recording of up to four VANC packets in the selected line, respectively,
regardless of the DID/SDID value.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.
If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).
• When VANC data is output to HDSDI playback signals, the number of the
output VANC line is the same as that of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or
essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to "off".
Selects the lines for the VANC to be received.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
Specification of the DID of the VANC to receive
00h-FFh
Specification of the SDID of the VANC to receive
00h-FFh
Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
Specification of whether to enable the power saving function
OFF, ON
Specification of the date and time
For installation of software upgrade
For details, refer to the Maintenance Manual.
For details, refer to the Maintenance Manual.
121
Maintenance Menu