Sony XDCAM HD PDW-HD1500 Operation Manual page 110

Item number Item name
601 VITC POSITION
SEL-1
602 VITC POSITION
SEL-2
605 TCG REGEN MODE
607 U-BIT BINARY GROUP FLAG
611 TC OUTPUT PHASE IN EE MODE
110
Setup Menu
Menu items in the 600s, relating to the timecode, metadata, and UMID
Settings
In 59.94i/59.94P/ Select the line into which to insert VITC signals (SD output)
29.97P mode 12H ... [16H] ... 20H: Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
In 50i/50P/25P Select the line into which to insert VITC signals (SD output)
mode 9H ... [19H] ... 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
In 59.94i/59.94P/ Select the line into which to insert VITC signals (SD output)
29.97P mode 12H ... [18H] ... 20H: Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
In 50i/50P/25P Select the line into which to insert VITC signals (SD output)
mode 9H ... [21H] ... 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
Select the signal to be regenerated when the timecode generator is in the
regeneration mode.
TC&UB: Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits are regenerated.
Select the user bits to be used in the timecode generated by the
timecode generator.
000 (000:not specified): Character set not specified.
001 (001:iso character): 8-bit characters compliant with ISO 646 and
010 (010:unassigned-1): Undefined.
011 (011:unassigned-2): Undefined.
100 (100:unassigned-3): Undefined.
101 (101:page / line): SMPTE-262M page/line multiplex system.
110 (110:unassigned-4): Undefined.
111 (111:unassigned-5): Undefined.
Select the timecode output mode for output from the TIME CODE OUT
connector in E-E mode.
thru (through): Output the timecode input to the TIME CODE IN
v-in (video input phase): Output the timecode with the same phase as
v-out (video output phase): Output the timecode with the same phase
both item 601 and item 602.
given priority if OUTPUT in setup menu item 731 is set to "auto" and the
VITC insertion line is set to line 16.
is given priority if OUTPUT in setup menu item 731 is set to "auto" and
the VITC insertion line is set to line 20.
both item 601 and item 602.
given priority if OUTPUT in setup menu item 731 is set to "auto" and the
VITC insertion line is set to line 16.
is given priority if OUTPUT in setup menu item 731 is set to "auto" and
the VITC insertion line is set to line 20.
ISO 2022.
connector as it is.
the input video signal phase.
as the output video signal phase.