Sony XDCAM HD PDW-HD1500 Operation Manual page 103

Item number Item name
031 RECORDING FORMAT
033 BATTERY END VOLTAGE
034 MENU STATUS DISPLAY ON
VIDEO MONITOR
035
CLIP TITLE NAMING SELECT
Sub-item
1 TITLE
2 PREFIX
3 NUMERIC
036 FILE NAMING
Sub-item
1 NAMING FORM
2 AUTO NAMING
B01 RECALL SETUP BANK-1
B02 RECALL SETUP BANK-2
B03 RECALL SETUP BANK-3
B11 SAVE SETUP BANK-1
B12 SAVE SETUP BANK-2
B13 SAVE SETUP BANK-3
Settings
Set the recording format.
HD422: HD422
420HQ: HD420HQ
420SP: HD420SP
IMX50(IMX50Mbps): MPEG IMX 50Mbps
IMX40(IMX40Mbps): MPEG IMX 40Mbps
IMX30(IMX30Mbps): MPEG IMX 30Mbps
DVCAM: DVCAM
Sets the voltage to shut down the unit in the battery operation. The battery
near end indicator flashes at +0.7 V of the set voltage.
10.5V to 13.5V: 10.5 V to 13.5 V in 0.5 V unit.
Specify whether to display the setup menu status at the left edge of the
a) status display line when setup menu item 005 "DISPLAY INFORMATION
SELECT" is set to "T&sta".
dis (disable): Do not display.
ena (enable): Display. (The display is visible only when no disc is loaded,
and during insertion and ejection of a disc.)
Specify whether to allow user definition of the titles assigned to clips.
off: Do not allow assignment.
on: Allow assignment.
See "Assigning user-defined clip titles" (page 86) for more information about
assigning titles.
Specify whether to assign titles to recorded clips.
disable: Do not assign titles to clips.
enable: Assign titles to clips.
Set the prefix of the title (up to 10 characters). The allowable characters are
alphanumeric characters, symbols (! # $ % & ' ( ) + , - . ; = @ [ ] ^ _ { } ~), and
the space character.
TITLE
Set the initial value of the numeric part of the title (00001 to 99999, five-digit
number).
00001
Specify whether to allow use of clip and clip list files with user-defined
names.
See "Alarms relating to audio and video signals" (page 137) for details about
how to make the settings.
Specify the clip and clip list naming format. (Specify whether to allow use of
files with user-defined names.)
C****: Standard format (Do not allow use of files with user-defined names)
free: Free format (Allow use of files with user-defined names)
When "free" is selected under the sub-item "NAMING FORM", specify the
format of the names of clips recorded on this unit. Specify the standard
name format, or the same name as the title listed below, or the name
specified in planning metadata.
C****: Use the standard format for clip names.
title: Use the title set in setup menu item 035 "CLIP TITLE NAMING
SELECT" for clip names.
plan: Use the name specified in planning metadata.
Set to "on" to recall menu settings from menu bank 1.
Set to "on" to recall menu settings from menu bank 2.
Set to "on" to recall menu settings from menu bank 3.
Set to "on" to save current menu settings to menu bank 1.
Set to "on" to save current menu settings to menu bank 2.
Set to "on" to save current menu settings to menu bank 3.
a)
a)
a)
a)
103
Setup Menu