Menu Button - Sony XDCAM HD PDW-HD1500 Operation Manual

Professional
Hide thumbs Also See for XDCAM HD PDW-HD1500:
Table of Contents

Advertisement

menu item 101 SELECTION FOR SEARCH DIAL
ENABLE to "dial").
Note
When setup menu item 101 SELECTION FOR SEARCH
DIAL ENABLE is set to "dial", after using the shuttle dial,
return it to the center position. If the shuttle dial is not in
the center position, it is possible occasionally for vibration
from other operations to activate the dial, and start
playback in shuttle mode.
4 Display/menu control section
5 RESET/RETURN button

4 MENU button

3 PUSH SET(S.SEL) knob
1 Function buttons (F1 to F6)
6 SUB CLIP/DISC MENU button and
7 THUMBNAIL button and indicator
8 DISPLAY button
9 SHIFT button
0 PAGE/HOME button
qa EXPAND button
qs CHAPTER button
a Function buttons (F1 to F6)
These buttons are enabled when the function menu (see
page 42) is visible. Each press of a button changes the
setting of the corresponding item in the menu.
For convenience, this manual refers to these buttons as
buttons F1 to F6, in order from the top.
b Display
Displays menus, audio level meters, and data such as time
data or clip information. The DISPLAY button lets you
switch to the video monitor display.
For details, see "Display window" on page 18.
16
Front Panel
2 Display
indicator
c PUSH SET(S.SEL) knob
Use for menu and GUI screen operations. Turn the knob to
select items, and press it to confirm the selection. This
button is also used to set numerical and timecode values.
See "GUI screen operations" (page 63) for more
information about how to use the thumbnail screens.
d MENU button
Displays the setup menu or the GUI screen menu. The
setup menu appears when no GUI screen is visible. The
same information is also superimposed on the display on a
monitor connected to the unit. Press once more to return to
the original display.
See "GUI screen operations" (page 63) for more
information about how to use the thumbnail screens.
e RESET/RETURN button
Functions as the RESET button or the RETURN button.
RESET button: Reset counters or the setting values of the
timecode generator. This button is also used to abort
or cancel setup menu, scene selection, and thumbnail
search operations.
RETURN button: In setup menu and GUI screens,
returns to the previous procedure.
f SUB CLIP/DISC MENU button and indicator
When pressed alone, functions as the SUB CLIP button.
When pressed together with the SHIFT button, functions
as the DISC MENU button.
SUB CLIP button: Press the button, lighting the
indicator, to carry out playback in clip list order (see
page 73). Jog and shuttle operations are supported
during clip list playback. To return to playback in
recording order, press the button again, turning the
indicator off.
Note
If no clip list is registered, this button does not light
when pressed. The operation is invalid.
DISC MENU button: When pressed together with the
SHIFT button, displays the Disc Menu (see page 79).
Press the button again, turning the indicator off, to
hide the Disc Menu.
See "GUI screen operations" (page 63) for more
information about how to use the thumbnail screens.
g THUMBNAIL button and indicator
To carry out a thumbnail search or create a clip list in the
GUI screen, press this button turning the indicator on.
Thumbnail images representing each clip or sub-clip
appear. Press once more, turning the indicator off, to return
to a whole-screen display.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents