To Clear Planning Metadata; Formatting Discs - Sony XDCAM HD PDW-HD1500 Operation Manual

To clear planning metadata

See page 63 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Clear Planning Metadata, and then press the
PUSH SET(S.SEL) knob.
A message appears asking if you are sure that you want
to clear the plannning metadata.
3
Select OK, and then press the PUSH SET(S.SEL)
knob.
The planning metadata is cleared from this unit's
memory.
To switch the title display in the display
window
When planning metadata is loaded into this unit, you can
select the format of the title to display in the display
window.
See page 63 for more information about GUI information.
1
Display the Disc Menu.
2
Select Settings, and then press the PUSH SET(S.SEL)
knob.
3
Select Planning Clip Name in Clip Info. Area and then
press the PUSH SET(S.SEL) knob.
See page 19 for more information about the clip
information area.
4
Select one of the following, and then press the PUSH
SET(S.SEL) knob.
Off: Do not display a title.
ASCII Clip Name: Display the ASCII format title
(see page 126)
Clip Name: Display the UTF-8 format title (see
page 126)

Formatting discs

See page 63 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Format Disc, and then press the PUSH
SET(S.SEL) knob.
A message appears asking you to confirm the format.
Format Disc
All Clips, Clip Lists and
Non-AV Data (General Files)
will be Deleted.
Format OK?
3
Select OK, and then press the PUSH SET(S.SEL)
knob.
To cancel the format
Select Cancel, and then press the PUSH SET(S.SEL)
knob.
To continue by formatting another disc
Exchange the disc, select OK, and then press the
PUSH SET(S.SEL) knob.
To exit the formatting screen
Press the PUSH SET(S.SEL) knob with Exit selected.
To disable the Format Disc command
To prevent inadvertent disc formatting, resulting in the
loss of recorded data, you can disable the Format Disc
command.
See page 63 for more information about GUI information.
1
Display the Disc Menu.
2
Select Settings, and then press the PUSH SET(S.SEL)
knob.
3
Select Disable "Format Disc", and then press the
PUSH SET(S.SEL) knob.
4
Select Disable, and then press the PUSH SET(S.SEL)
knob.
OK
Cancel
81
Disc Operations