Sony XDCAM HD PDW-HD1500 Operation Manual page 44

Item Setting
F5: SPEAKER Enables or disables output from this
unit's speaker.
OFF: Do not output
ON: Output
F6: LEVEL MT Specifies the position at which to
superimpose audio level meters in the
video monitor screen (in full-screen
display mode).
OFF: Do not superimpose.
LEFT: Superimpose the audio level
RIGHT: Superimpose the audio level
LEFT(4): Superimpose the audio level
RIGHT(4): Superimpose the audio level
LEFT(8): Superimpose the audio level
RIGHT(8): Superimpose the audio level
P3 AUDIO page
Item Setting
F1: A3 INPUT Selects the audio input signal to assign
to audio channel 3.
SDI: Audio signal embedded into SDI
ANALOG1: Analog 1 audio signal
AES/EBU3: Signal input to the DIGITAL
F2: A4 INPUT Selects the audio input signal to assign
to audio channel 4.
SDI: Audio signal embedded into SDI
ANALOG2: Analog 2 audio signal
AES/EBU4: Signal input to the DIGITAL
F3: A5 INPUT Selects the audio input signal to assign
to audio channel 5.
SDI: Audio signal embedded into SDI
ANALOG1: Analog 1 audio signal
AES/EBU1: Signal input to the DIGITAL
F4: A6 INPUT Selects the audio input signal to assign
to audio channel 6.
SDI: Audio signal embedded into SDI
ANALOG2: Analog 2 audio signal
AES/EBU2: Signal input to the DIGITAL
F5: A7 INPUT Selects the audio input signal to assign
to audio channel 7.
SDI: Audio signal embedded into SDI
ANALOG1: Analog 1 audio signal
AES/EBU3: Signal input to the DIGITAL
44
Basic Operations of the Function Menu
meters of 2 channels on the left side.
meters of 2 channels on the right
side.
meters of 4 channels on the left side.
meters of 4 channels on the right
side.
meters of 8 channels on the left side.
meters of 8 channels on the right
side.
signal
AUDIO(AES/EBU) IN 3/4 connectors
signal
AUDIO(AES/EBU) IN 3/4 connectors
signal
AUDIO(AES/EBU) IN 1/2 connectors
signal
AUDIO(AES/EBU) IN 1/2 connectors
signal
AUDIO(AES/EBU) IN 3/4 connectors
Item Setting
F6: A8 INPUT Selects the audio input signal to assign
to audio channel 8.
SDI: Audio signal embedded into SDI
signal
ANALOG2: Analog 2 audio signal
AES/EBU4: Signal input to the DIGITAL
AUDIO(AES/EBU) IN 3/4 connectors
P4 AUDIO page
Item Setting
F1: A5 VOL
Sets the volume of audio channel 5.
The volume can be adjusted within the
range from –200 to +200 (–∞ to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F2: A6 VOL
Sets the volume of audio channel 6.
The volume can be adjusted within the
range from –200 to +200 (–∞ to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F3: A7 VOL
Sets the volume of audio channel 7.
The volume can be adjusted within the
range from –200 to +200 (–∞ to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F4: A8 VOL
Sets the volume of audio channel 8.
The volume can be adjusted within the
range from –200 to +200 (–∞ to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F5: --- (Unassigned function button)
F6: AU METER Selects the display mode of the audio
level meters.
FULL: Display the range from –60 dB to
0 dB.
FINE: Display a magnified section with
0.25 dB step marks.
a) To enable this setting, the following settings are also required, in the same
way as for volume operations for channels 1 to 4.
- Set the VARIABLE switch of the front panel to "REC" or "PB".
- Set setup menu item 131 AUDIO VOLUME to "EACH".
a)
a)
a)
a)