Sony XDCAM HD PDW-HD1500 Operation Manual page 119

However, since with the factory default settings the
extended menu is not displayed, it is first necessary to
enable display of the extended menu.
To enable display of the extended menu
Proceed as follows to use the maintenance menu.
1
Holding down the PAGE/HOME button and the
SHIFT button, press the MENU button.
The maintenance menu appears on the video monitor
display.
M A I N T E N A N C E M E N U
M 0 : C H E C K
M 1 : A D J U S T
M 2 : S E R V I C E S U P P O R T
M 3 : O T H E R S
M 4 : S E T U P M A I N E N A N C E
M 5 : N E T W O R K
M 6 : D R I V E
2
Turn the PUSH SET(S.SEL) knob to select "M4
SETUP MAINTENANCE", then press the PUSH
SET(S.SEL) knob or the SELECT function button
(F2).
The sub-items of M4: SETUP MAINTENANCE
appears.
M A I N T E N A N C E M E N U
M 4 : S E T U P M A I N T E N A N C E
P M 4 0 : E X T E N D M E N U :
M 4 0 : C U S T O M I Z E :
M 4 6 : M E N U D A T A C O N T R O L
M 4 7 : S E T U P B A N K 4
M 4 8 : A U T O R E C A L L :
M 4 9 : R E S E T A L L S E T U P
3
Turn the PUSH SET(S.SEL) knob to select "M40
EXTENDED MENU", then press the PUSH
SET(S.SEL) knob or the SELECT function button
(F2).
The setting screen for M40: EXTENDED MENU
appears.
M A I N T E N A N C E M E N U
M 4 : S E T U P M A I N T E N A N C E
M 4 0 : E X T E N D M E N U :
P * D I S A B L E
E N A B L E
4
Turn the PUSH SET(S.SEL) knob to select
"ENABLE", and press the SAVE function button (F5).
p
d i s p
d i s
o f f
d i s
p
The message "NOW SAVING..." appears on the video
monitor display, and "Saving..." appears in the time
data display area, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor display and the time data display area
return to their normal indications.
When you next display the menu and change the item
display, the extended menu will appear after the basic
menu.
119
Setup Menu