Items In The Basic Menu - Sony PDW-HD1500 Operation Manual

Item group Function
Items Settings relating to the remote
200 to 299 control interface
Items Settings relating to editing
300 to 399 operations
Items Settings relating to preroll
400 to 499
Items Settings relating to disc
500 to 599 protection
Items Settings relating to the
600 to 650 timecode generator
Items Settings relating to the
651 to 699 metadata and UMID
Items Settings relating to video
700 to 799 control
Items Settings relating to audio
800 to 899 control
Items Settings relating to digital
900 to 999 processing

Items in the basic menu

The basic menu items (excluding the items related to the
digital hours meter) are listed in the following table.
• Item names are the names which appear on the video
monitor screen of this unit and an external monitor,
when the input signals to the monitor are the video
signals output from the COMPOSITE OUTPUT 2
(SUPER) connector, the SDSDI OUTPUT 2 (SUPER)
Item number Item name
001 PREROLL TIME
002 CHARACTER H-POSITION
003 CHARACTER V-POSITION
Refer to
page 98
page 98
page 99
page 99
page 99
page 99
page 102
page 104
page 106
connector, or the HDSDI OUTPUT 2 (SUPER)
connector.
• An abbreviated name appears in the time data display
area when you press the NEXT button.
• The values in the Settings column are the values which
appear in the time data display area. (The values may
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.
Settings
0 s (0 sec)... 5 s (5 sec)... 30 s (30 sec): Set the preroll time to between 0
and 30 seconds in steps of 1 second.
A preroll time of at least 5 seconds is recommended when using this
unit for editing.
Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2
(SUPER) connector for superimposed display on the monitor.
00... 0C ...28: The hexadecimal value 00 is for the far left of the screen.
Increasing the value moves the position of the characters to the right.
Set this item by adjusting to the required position while viewing the monitor.
Adjust the vertical screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2
(SUPER) connector for superimposed display on the monitor.
00... 2A ...32: The hexadecimal value 00 is for the top of the screen.
Increasing the value lowers the position of the characters.
Set this item by adjusting to the required position while viewing the monitor.
91
Setup Menu