Sony PDW-HD1500 Operation Manual page 100

Item number Item name
602 VITC POSITION
SEL-2
605 TCG REGEN MODE
607 U-BIT BINARY GROUP FLAG
611 TC OUTPUT PHASE IN EE MODE
612 TC OUTPUT MUTING IN SEARCH
MODE
651 UMID OUTPUT
652 UMID SD VANC LINE
100
Setup Menu
Menu items in the 600s, relating to the timecode, metadata, and UMID
Settings
In 59.94i mode Select the line into which to insert VITC signals (SD output)
12H ... [18H] ... 20H: Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
• In 59.94i mode (J), output of wide picture information is given priority if
• In 59.94i mode (UC), output of wide picture information is given priority
In 50i mode Select the line into which to insert VITC signals (SD output)
9H ... [21H] ... 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
Select the signal to be regenerated when the timecode generator is in the
regeneration mode.
TC&UB: Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits are regenerated.
Select the user bits to be used in the timecode generated by the
timecode generator.
000 (000:not specified): Character set not specified.
001 (001:iso character): 8-bit characters compliant with ISO 646 and
010 (010:unassigned-1): Undefined.
011 (011:unassigned-2): Undefined.
100 (100:unassigned-3): Undefined.
101 (101:page / line): SMPTE-262M page/line multiplex system.
110 (110:unassigned-4): Undefined.
111 (111:unassigned-5): Undefined.
Select the timecode output mode for output from the TIME CODE OUT
connector in E-E mode.
thru (through): Output the timecode input to the TIME CODE IN
v-in (video input phase): Output the timecode with the same phase as
v-out (video output phase): Output the timecode with the same phase
Select whether to suppress the output from the TIME CODE OUT
connector in jog/shuttle mode.
on: Suppress.
off: Do not suppress.
Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on: Output.
See "Using UMID Data" (page 127) for more information about UMID.
Select the line in which UMID is output when menu item 651 is set to
"on".
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
See "Using UMID Data" (page 127) for more information about UMID.
both item 601 and item 602.
OUTPUT in setup menu item 731 is set to "auto" and the VITC insertion
line is set to line 16.
if OUTPUT in setup menu item 731 is set to "auto" and the VITC
insertion line is set to line 20.
ISO 2022.
connector as it is.
the input video signal phase.
as the output video signal phase.
line), 18 H (18 line), 19 H (19 line) (59.94i mode)
15 H (15 line), 16 H (16 line), 17 H (17 line), 18 H (18 line) (50i
mode)