Sony PDW-HD1500 Operation Manual page 119

Alarm message in time Alarm message in video monitor screen Description/action
data display area
b) TC EXTERNAL IS SELECTED.
TC EXT!
SET TC INTERNAL MODE IN FUNCTION
MENU.
TCG REGEN MODE IS SELECTED.
a)
REGEN mode!
SET TC PRESET MODE IN FUNCTION
MENU.
a) TCG RUN MODE IS SET TO REC RUN.
REC RUN!
SET TC FREE RUN MODE IN FUNCTION
MENU.
b) THUMBNAIL(S) CANNOT BE
REC mode!
DISPLAYED DURING RECORDING.
CANNOT EXECUTE IN REC MODE.
DRIVE MAINTENANCE MENU CANNOT
BE EXECUTED WHILE IN REC MODE.
INPUT SELECTION CANNOT BE
CHANGED DURING RECORDING.
AUDIO REC MODE CANNOT BE
CHANGED DURING RECORDING.
REC-PAUSE! TC/UB CANNOT BE PRESET IN REC-
PAUSE MODE.
b) CLIP LIST IS NOT SELECTED.
No SEL List
b) TO ADD AN ESSENCE MARK, EXIT
SB CLP mode
FROM SUB CLIP MODE FIRST.
b) SUB CLIP IS INVALID.
SUB CLIP NG
SET APPROPRIATE IN/OUT POINTS.
b) NO CLIP LIST.
No List!
Loading List! LOADING CLIP LIST.
STOP ONCE, THEN EXECUTE.
b)
STOP ONCE!
No EM space ESSENCE MARK NOT RECORDED.
NO SPACE AVAILABLE TO RECORD
ESSENCE MARK.
EM Full! NO MORE ESSENCE MARKS CAN BE
RECORDED.
Disc Damage DISC CANNOT BE RECORDED TO.
USE ANOTHER DISC FOR RECORDING.
NON-AV Full DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING SPACE,
DELETE NON-AV DATA. (GENERAL
FILES)
This appears when TCG on page P4 TC of the
function menu is set to "EXT", and you try to preset
timecode or user bits by setting PRST/RGN to
"PRESET".
Set TCG to "INT" (see page 41)
This appears when PRST/RGN on page P4 TC of the
function menu is set to "TC" or "VITC", and you try to
preset timecode or user bits.
Set PRST/RGN to "PRESET"
This appears when RUN MODE on page P4 TC of
the function menu is set to "REC RUN", and you try to
preset timecode or user bits.
Set RUN MODE to "FREE RUN"
Stop recording and try again.
Stop recording and try again.
This appears when you press the SUB CLIP/
DISC MENU button while the clip list on the disc is
not loaded into the current clip list.
Load the clip list (see page 66)
This appears when you perform essence mark
operations with the SUB CLIP/DISC MENU button lit.
Try again after pressing the SUB CLIP/DISC MENU
button to turn it off.
Set the In and Out points again.
This appears when you try to delete a clip list when
there is no clip list saved on the disc.
Load the disc that contains the clip list you want to
delete.
This appears if the SUB CLIP/DISC MENU button is
pressed while a clip list is loading.Wait for the clip list
to finish loading and try again.
This appears when you press the SUB CLIP/DISC
MENU button during clip list playback.
Stop the playback and try again.
Use the PDZ-1 Proxy Browsing Software to delete
unneeded essence marks.
Or, delete unneeded shot marks in the chapter
thumbnail screen.
Use another disc.
Delete unneeded GENERAL files.
.
(see page 41) .
(see page 41) .
and try again.
119
Troubleshooting