Sony PDW-HD1500 Operation Manual page 69

To cancel the In point or Out point setting
Display the Thumbnail Menu, select Reset Inpoint or
Reset Outpoint, and then press the PUSH SET(S.SEL)
knob.
The In point or Out point setting returns to the previous
value.
6
Select OK, and then press the PUSH SET(S.SEL)
knob.
7
Repeat steps 1 to 6 as required.
8
Save the clip list (see page 69).
To delete sub clips
See page 58 for more information about thumbnail screen
operations.
1
Select the clips to delete in the clip list thumbnail
screen (multiple selections possible).
2
Display the Thumbnail Menu.
3
Select Delete Sub Clips, and then press the PUSH
SET(S.SEL) knob.
A message appears asking you to confirm the deletion.
4
Select OK, and then press the PUSH SET(S.SEL)
knob.
5
Repeat steps 1 to 4 as required.
6
Save the clip list (see page 69).
To play the clip list
Use the clip list thumbnail screen to play the clip list (see
page 65).
To change the starting timecode of clip
lists
The timecode of clip lists is continuous timecode,
unrelated to the timecode of the original clips. By default
the timecode (LTC) of the start of the clip list is
00:00:00:00, but it can be set to any value.
See page 58 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the
Thumbnail Menu.
2
Select Set Start Time Code, and then press the PUSH
SET(S.SEL) knob.
The Set Start Time Code screen appears.
Set Start Time Code
TC 2 2 : 3 4 . 5 6 : 1 7
H M I N
Preset TC 00:00:00:00
3
Press the B/IN or b/OUT button to select the digit that
you want to change.
4
Turn the PUSH SET(S.SEL) konb or the jog dial to
change the value of the digit.
5
Repeat steps 3 and 4 as required.
To reset the timecode to 00:00:00:00
Select Reset to Zero in the Thumbnail Menu, and then
press the PUSH SET(S.SEL) knob.
To preset the frequently used timecode
Select Save Preset TC in the Thumbnail Menu, and
then press the PUSH SET(S.SEL) knob.
The timecode set in steps 4 and 5 is saved as a preset
value.
To recall the preset timecode
Select Recall Preset TC in the Thumbnail Menu, and
then press the PUSH SET(S.SEL) knob.
6
Press the PUSH SET(S.SEL) knob.
OK is selected.
7
Press the PUSH SET(S.SEL) knob again.
8
Save the clip list (see page 69).
To save clip lists
To save under a specified name
See page 58 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu.
S E C F R M
OK
Cancel
Scene Selection (Clip List Editing)
69