Sony PDW-HD1500 Operation Manual page 67

To check the addition results
Move the cursor.
6
Press the RESET/RETURN button.
This returns you to the Clip thumbnail screen.
7
Repeat steps 1 to 6 as required to add more clips.
8
Save the clip list (see page 69).
In step 1, you can hold down the SHIFT button when you
press the PUSH SET(S.SEL) knob. This is a shortcut that
displays the Add Sub Clip screen immediately. You can
also save the clip list immediately in step 5 by executing
the Save Clip List command in the Disc Menu.
Adding sub clips from the clip list thumbnail
screen
See page 58 for more information about thumbnail screen
operations.
1
Display the Thumbnail Menu.
2
Select Add Sub Clips, and then press the PUSH
SET(S.SEL) knob.
The Clip List (Add) screen appears.
Clip List (Add)
TC 00:30:25:11 TC 00:30:40:13
TC 00:24:24:29 TC 00:24:34:27
Scene Selection
3
Select the sub clips that you want to add from the
upper part of the screen (the part where 8 thumbnails
are displayed, multiple selections possible).
To select from expanded thumbnails
Press the EXPAND button to display the expand
thumbnail screen.
To select from chapter thumbnails
Press the CHAPTER button to display the chapter
thumbnail screen.
4
Press the PUSH SET(S.SEL) knob.
The thumbnail selection is confirmed, and an I cursor
appears at the bottom of the Clip List (Add) screen (in
the Scene Selection window). The I cursor indicates
002 017/035
TC 01:01:28:25 TC 00:09:43:14
TC 00:24:46:22 TC 00:24:56:24
00:13:48:24
TOTAL
the location where the currently selected sub clips will
be inserted.
To display the total duration after addition of the
selected clips
Press the SHIFT button.
5
In the Scene Selection window, move the I cursor to
the location where you want to insert the clip. (The
existing thumbnails arrange themselves to the left and
right of the I cursor.)
6
Press the PUSH SET(S.SEL) knob.
The sub clips are added at the I cursor position, and
you return to the clip list thumbnail screen.
You can check the results of the addition in that screen.
7
Repeat steps 1 to 6 as required to add more clips.
8
Save the clip list (see page 69).
In step 1, you can also perform a shortcut operation by
pressing the PUSH SET(S.SEL) knob with the SHIFT
button held down.
To add clips from the clip playback screen (quick
insertion)
This method allows you to decide the range to use and add
that range as a sub clip while viewing the video in the clip
playback screen. It does not use GUI screens. You can do
this during recording, playback (including pauses), and
searches.
1
Find the point that you want to make the start point of
the sub clip, and then press the PUSH SET(S.SEL)
knob with the B/IN button held down.
An In point is set and the IN indicator lights.
2
Find the point that you want to make the end point of
the sub clip, and then press the PUSH SET(S.SEL)
knob with the b/OUT button held down.
An Out point is set and the OUT indicator lights. (This
determines the range of the sub clip to be added.)
To check the timecode of the In point or Out point
Press the B/IN button or the b/OUT button.
To cue up the In point or Out point
Press the PREV button or the NEXT button with the
B/IN button or b/OUT button held down.
To check the duration (time from In point to Out
point)
Press the B/IN and b/OUT buttons at the same time.
Scene Selection (Clip List Editing)
67