Extended Menu Operations - Sony PDW-HD1500 Operation Manual

Item number Item name
920 SD-SDI H-ANC CONTROL
Sub-item
1 AUDIO 5CH-8CH
2 RP188 ATC
930 DOWN CONVERTER MODE (DC)
931 DOWN CONVERTER LETTER BOX
MODE (DC)
932 H CROP POSITION (DC)
934 CROSS COLOR (DC)
935 DETAIL GAIN (DC)
936 LIMITER (DC)
937 CRISP THRESHOLD (DC)
938 LEVEL DEPEND THRESHOLD
(DC)
939 H DETAIL FREQUENCY (DC)
940 H/V RATIO (DC)
942 V FILTER SELECT
943 CROSS COLOR CRISP

Extended menu operations

The extended menu can be used with the same procedures
as in the basic menu.
However, since with the factory default settings the
extended menu is not displayed, it is first necessary to
enable display of the extended menu.
To enable display of the extended menu
Proceed as follows to use the maintenance menu.
106
Setup Menu
Menu items in the 900s, relating to digital process
Settings
Select whether to add information to the SDI output.
off: Do not add digital audio data channels 5 to 8.
on: Add digital audio data channels 5 to 8.
off: Do not add RP188 timecode data.
on: Add RP188 timecode data.
Select the down-converter mode.
CROP (EDGE CROP): Select the edge-crop mode.
L-BOX (LETTER BOX): Select the letter box mode.
SQUEZ (SQUEEZE): Select the squeeze mode.
Select the aspect ratio of the down-converter output when menu item
930 is set to "l-box".
16:9: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the down converter output when menu item 930 is set to "crop".
–120 to 0 to 120
Adjust the down-converter cross color.
0 to 8 to 15
Adjust the down-converter image enhancer, the sharpness of edge
emphasis.
0 to 7FH
Adjust the down-converter image enhancer, the maximum detail level
added to emphasize the original signal.
0 to 20H to 3FH
Adjust the down-converter image enhancer, the threshold amplitude at
which low amplitude signals are not emphasized.
0 to FH
Adjust the down-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8 to FH
Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6MHz, 3.4MHz, 3.9MHz, 4.6MHz
Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
Set the vertical interpolation filter coefficient for down-converter output.
1 to 3
Set the cross color crisp level for down-converter output.
0 to 4 to FH
1
Holding down the PAGE/HOME button and the
SHIFT button, press the MENU button.
The maintenance menu appears on the video monitor
display.