Sony PDW-HD1500 Operation Manual page 93

Item number Item name
016 ALARM DISPLAY
017 SUB STATUS DISPLAY SELECT Determine the kind of sub status information to be output from the
024 MENU CHARACTER TYPE
028 HD CHARACTER
029 STORED OWNERSHIP
033 BATTERY END VOLTAGE
034 MENU STATUS DISPLAY ON
VIDEO MONITOR
Settings
Select whether to display alarm messages.
off: Do not display alarm messages. (However, certain important alarms are
displayed.)
limit (on (limited)): Display only a minimum number of alarm messages.
on: Display all alarm messages.
For details about alarm message display conditions, see "Alarms"
(page 116).
COMPOSITE OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2
(SUPER) connector, or the HDSDI OUTPUT 2 (SUPER) connector.
off: Do not output sub status information.
tc (tc mode): Settings of items 626 and 627
rmain (disc remain): Available disc space (unit: minute)
clip (clip no): Order of playback of the selected clip/total number of clips
pbr (playback remain): The remaining playback time of the selected clip
from the current playback position (hours:minutes:seconds:frames).
Note
When menu item 005 is set to "off", sub status information is not displayed
when this item is set to anything other than "off".
Determine the type of characters in menu text output from the COMPOSITE
OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2 (SUPER) connector,
or the HDSDI OUTPUT 2 (SUPER) connector for superimposed display on
the monitor.
white: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
Set this item by selecting the required type while viewing the monitor.
Specify whether to superimpose text information on the video signal output
from the HDSDI OUTPUT 2 (SUPER) connector.
off: Do not superimpose.
f-key: Follow the function menu setting.
Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off: Do not enable.
on: Enable.
See "Using UMID Data" (page 127) for more information about UMID.
Sets the voltage to shut down the unit in the battery operation. The battery
near end indicator flashes at +0.7 V of the set voltage.
10.5V to 13.5V: 10.5 V to 13.5 V in 0.5 V unit.
Specify whether to display the setup menu status at the left edge of the
status display line when setup menu item 005 "DISPLAY INFORMATION
a)
SELECT" is set to "T&sta".
dis (disable): Do not display.
ena (enable): Display. (The display is visible only when no disc is loaded,
and during insertion and ejection of a disc.)
93
Setup Menu