To Adjust The Sound Quality (Digital Sound Preset); Selecting The Sound Quality; Adjusting The Sound Quality - Sony Walkman MZ-R909 Operating Instructions Manual

To adjust the sound
quality (Digital Sound
Preset)
You can make adjustments to the sound
quality to suit your taste, and then store
two sets of these adjustments.

Selecting the sound quality

Factory settings of the Digital
Sound Preset
Factory settings of the Digital Sound
Preset are the followings:
• "SOUND 1": bass +1, treble ±0
• "SOUND 2": bass +3, treble ±0
To select a preset sound
On the recorder
1 Press the jog dial, turn the dial until
"SOUND" flashes in the display, and
then press the dial again.
2 Turn the jog dial until "SOUND 1" or
"SOUND 2" flashes in the display, and
then press the dial.
48
x/X
Jog dial
SOUND
Control
On the remote control
1 Press SOUND repeatedly to select
"SOUND 1" or "SOUND 2" appears in
the display.

Adjusting the sound quality

On the recorder
1
While playing, press the jog dial, turn
the dial until "SOUND" flashes in the
display, and then press the dial again.
2
Turn the jog dial until "SOUND 1" or
"SOUND 2" flashes in the display.
The display shows the currently
selected "T" (treble) and "B" (bass)
sound setting.
Select "T" or "B" pressing x (to
move the cursor downward) or X (to
move the cursor upward).
You can change the adjust the item in
which the cursor is flashing.
x
When you adjust treble, select "T".
When you adjust bass, select "B".