On The Remote Control; Connecting To A Stereo System (Line Out) - Sony Walkman MZ-R909 Operating Instructions Manual

On the remote control

1
Press DISPLAY while playing.
Each time you press DISPLAY, the
display changes as follows.
Display window on the remote control
D E
Indication D/E
Track number/Elapsed time
r
Track number/Track name
r
The number of tracks in the group/
Group name
r
The number of tracks in the disc/
Disc name
r
—/Recorded time
Note
Items may appear differently depending on the
group mode's on/off status, the recorder's
operating status, or the recorder settings.
z
• If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 38.
• The display that appears on the recorder is
different from the ones on the remote control.
See "On the recorder" (page 52) to check the
display that appears on the recorder.
DISPLAY
Connecting to a stereo
system (LINE OUT)
Connect the i/LINE OUT jack of the
recorder to the LINE IN jacks of an
amplifier or a tape player with a line
cable. For more information on line
cables, see "Optional accessories"
(page 88). The output is analog. The
recorder plays the MD digitally and sends
analog signals to the connected
equipment.
Portable DAT
recorder
to LINE IN
Stereo mini-plug
RK-
G136
to i/LINE OUT
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the "AUDIO OUT" parameter for the
i/LINE OUT jack.
1
Press the jog dial, turn the dial until
"AUDIO OUT" flashes in the display,
and then press the dial again.
2
Turn the jog dial until "LINE OUT"
flashes in the display, and then press
the dial.
Stereo system,
etc.
2 phono plugs
R L
(red) (white)
RK-
G129
Jog dial
53