Adjusting Treble Or Bass (Digital Sound Preset); Selecting The Sound Quality; Adjusting The Sound Quality - Sony Walkman MZ-NF610 Operating Instructions Manual

Adjusting treble or bass
(Digital Sound Preset)
You can adjust the treble and bass to suit
your taste. The player can store two sets
of treble-bass adjustments, which can
then be selected later during playback.
Jog lever

Selecting the sound quality

Factory settings
Factory settings of the Digital Sound
Preset are as follows:
• "SOUND1": bass +1, treble ±0
• "SOUND2": bass +3, treble ±0
1
Press SOUND repeatedly to select
"SOUND1" or "SOUND2" in the
display.
To cancel Digital Sound Preset
Select "OFF" in step 1.
38
SOUND

Adjusting the sound quality

You can change the preset sound quality
and store the results in "SOUND1" or
"SOUND2".
1
Press SOUND repeatedly to select
"SOUND1" or "SOUND2".
2
During playback, press SOUND for 2
seconds or more.
The recorder changes to B (bass)
setting mode. Pressing jog lever
changes the recorder to T (treble)
setting mode.
When you select bass-setting mode,
"B" appears. When you select treble
setting mode, "T" appears.
3
Slide the jog lever repeatedly to
adjust the level.
Example: While adjusting the bass
The cursor moves.
(Position: –2)
–4
The sound can be adjusted in 8 steps
(–4, –3, ...±0, ...+2, +3).
To switch "B" (bass) and "T"
(treble):
Press the jog lever.
To switch "SOUND1" and
"SOUND2":
Press SOUND.
+3
±0