Sony Walkman MZ-R909 Operating Instructions Manual page 81

Sony operating instructions portable minidisc recorder mz-r909
Hide thumbs Also See for Walkman MZ-R909:
Table of Contents

Advertisement

Symptom
Volume cannot be
turned up.
An MD is not
played normally.
An MD is not
played from the
first track.
Playback sound
skips.
Sound has a lot of
static.
Cannot find the
track marks.
The rechargeable
battery does not
start charging.
The rechargeable
battery cannot be
fully charged.
The clock loses
time or the display
flashes.
The recording
date was not
stamped onto the
disc.
CD text
information
cannot be
recorded.
Cause/Solution
• AVLS is on.
, Set AVLS to "AVLS OFF" (page 72).
• Playback mode is changed.
, Use the jog dial on the recorder or press RPT/ENT on the
remote control to change back to the normal play.
• Disc playing stopped before it came to the last track.
, Press N for 2 seconds or more to start playing, or press the
control towards . repeatedly on the remote.
• The group mode is turned on.
, Turn the group mode off and play from the first track (press N
for 2 seconds or more to start playing, or press the control
towards . repeatedly on the remote).
• The disc information has been stored to the Personal Disc Memory.
, Erase the disc information from the Personal Disc Memory.
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
• Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong magnetism.
• You pressed X after pressing . or >.
, Press X before turning the jog dial or pressing . or >.
• The rechargeable battery has been inserted incorrectly or the AC
power adaptor has been connected incorrectly.
, Insert the battery correctly or connect the AC power adaptor
correctly.
• The terminals of the battery charging stand is dirty.
, Clean the terminals with a dry cloth.
• The built-in battery for the clock is weak.
, Connect the AC power adaptor to DC IN 3V on the recorder and
the wall outlet to charge the built-in battery. After charging, set
the clock again (page 39). Note that the clock may gain or lose
up to about 2 minutes per month under normal condition.
• The clock is not set.
, Set the clock (page 39).
• The cable connecting the devices is not an optical cable.
, Use an optical cable to connect the devices.
• The connected portable CD player does not supports CD-TEXT.
, Connect a portable CD player (D-E999, etc.) that supports CD-
TEXT (page 40).
• The inserted CD does not support CD-TEXT.
, Insert a CD that supports CD-TEXT.
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents