Checking The Remaining Time Or The Playing Position; On The Recorder - Sony Walkman MZ-R909 Operating Instructions Manual

Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback. Group-related items
appear only when a track with group
settings is played and then stopped.

On the recorder

1
While the recorder is playing, press
the jog dial, turn the dial until
"DISPLAY" flashes in the display,
and then press the dial again.
2
Turn the jog dial until the information
you want flashes in the display.
Each time you turn the dial, the
display changes as follows.
LapTime (The elapsed time.)
r
1 Remain (The remaining time of
the current track.)
r
GP Remain (The remaining time
after the current location in the
group.)
r
AllRemain (The remaining time
after the current location.)
r
RecDate (Recording date and
time.)
52
Jog dial
Note
Items may appear differently depending on the
group mode's on/off status or the recorder's
operating status.
3
Press the jog dial.
The display changes as follows.
The item selected in step 2 appears in
section C in the display. However, if
you select "LapTime" in step 2,
section C remains blank.
Display window on the recorder
A
B
C
Indication A/B/C
A B
Track Elapsed time
number
Track Remaining
number time of the
current track
Number of Remaining
tracks after time after the
the current current
track in the location in the
group group
Number of Remaining
tracks after time after the
the current current
track location in the
group
Recorded Recorded time RecDate
date
Note
Items may not be selectable depending on the
group mode's on/off status or the recorder's
operating status.
z
The display that appears on the remote control
is different from the ones on the recorder. See
"On the remote control" (page 53) to check the
display that appears on the remote control.
C
—
(LapTime)
1 Remain
GP
Remain
AllRemain