Selecting And Playing Desired Groups (Group Skip Mode) - Sony Walkman MZ-R909 Operating Instructions Manual

On the remote control
1
Insert a disc which has group settings
into the recorder and play the disc.
2
Press DISPLAY for 2 seconds or
more, turn the control towards .
or N> until "GROUP" flashes in
the display, and then press x.
3
Turn the control towards . or
N> until "GROUP ON" flashes
in the display, and then press x.
The elapsed time of the track and "G"
(group mode) appears in the display
and then group mode turns on.
Playback stops at the end of the last
track in the selected group.
For details on selecting another
group, see "Selecting and playing
desired groups (Group skip mode)"
(page 44).
z
• You can also change the playback mode
(repeat play, shuffle play, or program play) in
the selected group. After the procedures here,
follow the steps of "Changing a play mode"
(page 45).
• In group mode, pressing > on the recorder
or N> on the remote control during the
last track of the group moves playback to the
first track of the group, and pressing . on
the recorder or the remote control during the
first track of the group moves playback to the
last track of the group.
• The settings can be stored to the Personal Disc
Memory (page 51).
To turn off the Group function
On the recorder, press GROUP for 2
seconds or more again.
On the remote control, select "GROUP
OFF" in step 3, and then press x.
44
Note
In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated in
the display window on the recorder as
"Group --". Within a group, the tracks appear in
their order on the disc, not their order within the
group.
Selecting and playing desired
groups (Group skip mode)
With a disc which has group settings, you
can skip from the currently playing group
to any other group on the disc. You can
select a desired group directly using the
jog dial on the recorder.
On the recorder
1
Insert a disc which has group settings
into the recorder and play the disc,
and then press GROUP slightly.
" " flashes in the display and the
group skip mode turns on.
2
Within 5 seconds, turn the jog dial to
select your desired group, and then
press the jog dial.
The recorder starts playing from the
first track in the group.
z
You can also select a group using the ./>
buttons in step 2.
On the remote control
1
Insert a disc which has group settings
into the recorder and play the disc.
2
Press and hold PLAYMODE until "–
– –" flashes in the display.
The group skip mode turns on.