To Release A Group Setting; Moving Recorded Tracks; On The Recorder - Sony Walkman MZ-R909 Operating Instructions Manual

To release a group
setting
x
Jog dial
1
Press GROUP for 2 seconds or more.
" " lights up in the display and the
group mode turns on.
2
Follow steps 1 and 2 of "On the
recorder" in "Selecting and playing
desired groups (Group skip mode)"
(page 44) and check the contents of
the group you want to release. Then
press x.
3
Press the jog dial, turn the dial until
"EDIT" flashes in the display, and
then press the dial again.
4
Turn the jog dial until "
flashes in the display, and press the
jog dial.
"Release?" appears and
"PushENTER" flashes in the display.
5
Press the jog dial.
The group setting of the selected
group is released.
64
GROUP
: Release"

Moving recorded tracks

You can change the order of the recorded
tracks.
Example
Move track C (track number 3) from the
third to the second track.
A B
Before moving
A C
After moving

On the recorder

1
While playing the track you want to
move, press the jog dial, turn the dial
until "EDIT" flashes in the display,
and then press the dial again.
The recorder plays the selected track
repeatedly.
2
Turn the jog dial until "
flashes in the display, and then press
the dial.
The selected track number or name of
the group that the selected track
belongs (when the group mode is
turned on) flashes in the display.
If the track has been labeled, press
> to make the track name appear
in the display. Press . to display
the track number again.
C D
B D
Jog dial
: Move"