Registering Tracks Or Groups As A New Group (Group Setting) - Sony Walkman MZ-R909 Operating Instructions Manual

Sony operating instructions portable minidisc recorder mz-r909
Hide thumbs Also See for Walkman MZ-R909:
Table of Contents

Advertisement

Registering tracks or
groups as a new group
(Group setting)
Do the following procedure to register
tracks (or groups). A series of tracks (or
groups) can be registered by selecting the
starting and ending tracks (or groups).
The tracks (or groups) must, however, be
sequential. If the desired tracks (or
groups) are not consecutive, you must
move them to make them consecutive
before you can register them ("Moving
recorded tracks", page 64). This function
can be used at any time, whether group
mode is on or off.
1 2 3 4 5 6 7 8 9
Making a new
group with
tracks 1 to 3.
Group
1 2 3 4 5 6 7 8 9
• Registration of non-consecutive tracks
is not possible (for example, the 1, 3, 2,
4, 3, 5, 6, 6, 8 and then 9).
• Tracks always appear according to their
order on the disc, not their order within
the group (even when group mode is
on).
1
While the recorder is stopped, press
the jog dial, turn the dial until "EDIT"
flashes in the display, and then press
the dial again.
Group
Group
Making a new group
with 2 groups.
Group
Jog dial
2
Turn the jog dial until "
flashes in the display, and then press
the jog dial.
"001" flashes in the display.
3
Turn the jog dial until the number or
name of the desired first track flashes
in the display, and then press the jog
dial.
This selects the first track of the new
group.
Even when the group mode is on,
track numbers appear according to
their order on the disc, not their order
within the group.
4
Turn the jog dial until the number or
name of the desired last track flashes
in the display, and then press the jog
dial.
This selects the last track of the new
group.
5
Follow steps 4 to 7 of "Labeling
recordings" (page 55) to label a
group.
Notes
• In step 3, the first track must either be the first
track of an existing group or a track that does
not belong to a group.
• When selecting the last track in step 4, make
sure the track comes after the one selected in
step 3. The last track must either be the last
track of an existing group or a track that does
not belong to a group.
: Set"
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents