Honda Super Cub 2019 Manual page 85

20180726215216_32K0GC000_eng_BOOK Page 85 Thursday, July 26 2018 21:57:26 JST
Engine Oil Changing Engine Oil
u
Place your motorcycle on its centre stand
3.
on a firm, level surface.
Place a drain pan under the drain bolt.
4.
Remove the oil fill cap, drain bolt and
5.
sealing washer to drain the oil.
Discard the oil at an approved
u
recycling centre.
Sealing washer
Drain bolt
82
Install a new sealing washer onto the
6.
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
Fill the crankcase with the recommended
7.
oil ( P. 67, P. 134) and install the oil fill
2 2
cap.
Required oil
When changing oil:
0.8 L (0.8 US qt, 0.7 Imp qt)
Check the oil level. P. 80
8.
2
Check that there are no oil leaks.
9.