Honda Super Cub 2019 Manual page 49

20180726215216_32K0GC000_eng_BOOK Page 49 Thursday, July 26 2018 21:57:26 JST
Answer Back System
Push the ignition switch 1 time.
e
Repeat this step 3 times as follows:
f
Press the answer back button on the
Honda SMART Key 2 times and the
ignition switch 1 time.
When the answer back button is pressed,
u
the LED on the Honda SMART Key
comes on. Make sure the LED went off
before the next button pressing.
If the answer back button or ignition
u
switch is not pressed for 1 minute, the
Honda SMART Key indicator starts
blinking and this mode will be cancelled.
If so, remove the EM mode coupler,
return to and follow the procedure
c
again.
46
(Continued)
Press the answer back button to select from
g
3 levels for the sound volume.
The Honda SMART Key indicator and
ignition switch ring come on while setting.
Wait for about 10 seconds until the ignition
h
switch ring starts blinking. The sound
volume level is set.
Remove the EM mode coupler from the EM
i
mode connector to finish setting.
u
Store the EM mode coupler on the battery
j
cover. Reinstall the parts in reverse order.
The sound volume level is also set if you
remove the EM mode coupler before the
ignition switch ring starts blinking.