20180726215216_32K0GC000_eng_BOOK Page 110 Thursday, July 26 2018 21:57:26 JST
Unlock the Ignition Switch in an Emergency
#
Set up to ID number input mode
Remove the centre cover.
1.
Pull out the EM mode connector.
2.
Remove the blue dummy coupler by
3.
releasing the tab of the EM mode
connector while lifting the hook of the
blue dummy coupler.
Check the ID number on the ID tag.
4.
Connect the EM mode coupler on the
5.
battery cover to the EM mode connector.
P. 77
2
EM mode
coupler
Blue dummy
coupler
Tab
Hook
EM mode connector
ID number
Continued
107