Honda Super Cub 2019 Manual page 72

20180726215216_32K0GC000_eng_BOOK Page 72 Thursday, July 26 2018 21:57:26 JST
#
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use a
dry cloth with high flash-point solvent. Use a
soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant.
Recommended lubricant:
Drive chain lubricant
If not available, use SAE 80 or 90 gear
oil.
Maintenance Fundamentals
Never use petrol or low flash point solvents for
cleaning the drive chain.
A fire or explosion could result.
Avoid getting lubricant on the brakes or tyres.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the motorcycle.
69