Honda Super Cub 2019 Manual page 45

20180726215216_32K0GC000_eng_BOOK Page 45 Thursday, July 26 2018 21:57:26 JST
Anti-theft Alarm System
#
Adjusting the Sensitivity of Anti-theft
Alarm System
You can select from 3 sensitivity levels for the
anti-theft alarm system.
Remove the centre cover.
a
Make sure that the Honda SMART Key
b
system is activated.
Push the ignition switch to authenticate the
c
Honda SMART Key system.
Connect the EM mode coupler provided on
d
the battery cover to the EM mode
connector.
(P.107)
The Honda SMART Key indicator and
u
ignition switch ring go off.
Alarm button
42
(Continued)
(P.77)
(P.32)
(P.36)
Ignition switch
Ignition switch ring
Push the ignition switch 1 time.
e
Repeat this step 3 times as follows:
f
Press the alarm button on the Honda
SMART Key 2 times and the ignition
switch 1 time.
When the alarm button is pressed, the
u
LED on the Honda SMART Key comes
on. Make sure the LED went off before
the next button pressing.
If the alarm button or ignition switch is
u
not pressed for 1 minute, the Honda
SMART Key indicator starts blinking and
this mode will be cancelled. If so, remove
the EM mode coupler, return to
follow the procedure again.
and
c