Honda Super Cub 2019 Manual page 50

20180726215216_32K0GC000_eng_BOOK Page 50 Thursday, July 26 2018 21:57:26 JST
#
Changing the Answer Back Buzzer
Sound Pattern
You can select buzzer sound from 3 patterns.
Remove the centre cover.
a
Make sure that the Honda SMART Key is
b
activated.
(P.32)
Push the ignition switch to authenticate the
c
Honda SMART Key system.
Connect the EM mode coupler provided on
d
the battery cover to the EM mode
connector.
(P.107)
The Honda SMART Key indicator and
u
ignition switch ring go off.
Answer back button
(P.77)
(P.36)
Ignition switch
Ignition switch ring
Push the ignition switch 1 time.
e
Repeat this step 3 times as follows:
f
Press the answer back button on the
Honda SMART Key 3 times and the
ignition switch 1 time.
When the answer back button is pressed,
u
the LED on the Honda SMART Key
comes on. Make sure the LED went off
before the next button pressing.
If the answer back button or ignition
u
switch is not pressed for 1 minute, the
Honda SMART Key indicator starts
blinking and this mode will be cancelled.
If so, remove the EM mode coupler,
return to and follow the procedure
c
again.
Continued
47