Table of Contents
Advertisement
-MultiWay
IE
CONFIGURATION FILE SAVE/RESTORE FUNCTION
Requirements
The Configuration File Save/Restore Function allows a user to backup all the
configuration settings of a unit. With this backup, a user can restore settings to a
unit if necessary or use the backup to apply the same settings to a different unit.
All configurable managed objects are saved in a configuration file that is stored in
the unit's Large File Area. This includes all configurable settings such as VLAN
and IP Address configurations and SNMP agent settings. The configuration file
can be transferred from the unit to a PC and saved to disk via the iView
2
(iConfig
view) protocol. The configuration file can be transferred from a PC to a unit of the
same type via iView
2
(iConfig view) or TFTP into the unit's Large File Area. After
the transfer is complete, the unit copies the configuration to flash and reboots.
The configuration file's contents is device-type specific and can be identified by
iView
2
(iConfig view) as a configuration file as well as to what type of device it is
applicable to.
SAVING A CONFIGURATION FILE TO DISK
From the Administration Tab in iView
2
(iConfig view) click the Save
Configuration button:
52
Advertisement
Table of Contents
Need help?
Do you have a question about the IE-MultiWay and is the answer not in the manual?
Questions and answers