Table of Contents

Advertisement

Command

cleandb

Reboots the unit with a clean database. This removes all information
from the database and sets the unit to factory defaults.
download
Downloads firmware via the TFTP protocol
accounts
Allows the addition for User, Superuser, Admin
vlan
Provides selection of two modes of operation to support all VLAN
configurations.
bw
Displays settings for Bandwidth configuration
mactab
Displays MAC tables
ifstats
Displays interface statistics
rmstats
Displays remote monitoring (RMON) statistics on packets received as
defined in RFC 2819 for RMON.
sysDescr
Allows the editing of sysName, sysDescr, and Port information
reboot
Allows a soft reboot of the unit after changes are made by the end
user
oam
Enable/disable OAM
sfpstats
Provides information about the wavelength, serial number, output
power, BER and other information. Requires an SFP with DDMI.
unit
Unit global settings, frame size selection. Unit OAM enable must be
enabled for AH and AG to function.
port
Displays the port status and allows changes to port settings, such as
duplex status and speed.
CLEANDB
Entering cleandb reboots the unit with its database cleaned depending on the option
selected. Users are presented with two, sequential options, first to reset all SNMP settings
and, second, to reset all of the units configuration to default. Enabling the first option
presents the second. Resetting the unit to factory default values (option two) will delete all
custom IP and other configurations performed through iView².
Description
20
-MultiWay
IE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IE-MultiWay and is the answer not in the manual?

Questions and answers

Table of Contents