micon: Get rs485 status complete. cmd [0x94h], dat [0x3h], sta [0x6h]
Starting...
Sending Serial Data
send = 10
sending data tx[000]-[009] 01 02 03 04 05 | 06 87 08 09 0a
TX End
rece = 10
receiving data rx[000]-[009] 01 02 03 04 05 | 06 87 08 09 0a
Recv success.
Terminating...
Special note:
The interrupt configuration of the RS-422/485 communication port is IRQ7 (fixed) in the BIOS.
The device cannot share interrupts.
On the other hand, Linux initially sets IRQ7 to interrupt sharing with other devices.
During RS-422/485 communication, interrupt may not occur when interrupt sharing is necessary, resulting
in communication failure. In order to avoid this, reassign the IRQ assignment from 7 to 4.
BX-830 Ubuntu 14.04 Desktop 64bit Operational Check Manual
4 Operational Check Details
19
Need help?
Do you have a question about the IPC Series and is the answer not in the manual?