Siemens SINUMERIK 840Di sl Function Manual page 4

Foreword
Standard version
This documentation only describes the functionality of the standard version. Extensions or
changes made by the machine tool manufacturer are documented by the machine tool
manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or
when servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case of
installation, operation or maintenance.
Technical Support
If you have any technical questions, please contact our hotline:
Phone
Fax
Internet
E-Mail
Note
Country specific telephone numbers for technical support are provided under the following
Internet address:
http://www.siemens.com/automation/service&support
Questions about the manual
If you have any queries (suggestions, corrections) in relation to this documentation, please
send a fax or e-mail to the following address:
Fax:
Email:
A fax form is available at the end of this document.
4
Europe / Africa
+49 180 5050 222
+49 180 5050 223
http://www.siemens.com/automation/support-request
mailto:adsupport@siemens.com
+49 (0) 9131 / 98 - 63315
mailto:docu.motioncontrol@siemens.com
Asia / Australia
+86 1064 719 990
+86 1064 747 474
Function Manual, 11/2006, 6FC5397-5BP10-2BA0
America
+1 423 262 2522
+1 423 262 2289
Synchronized actions