Sounder - Risco ProSYS Plus Installation And Programming Manual

Quick keys Parameter
Options for 2-Way Keyfob
The available programmable functions for the buttons:







 Sounder
Define the following for an external siren that is connected to the ProSYS Plus as a
bus accessory:
•
Parameter
•
Bus Sounders
•
2-Way WL Sounders
Note
Access to this sub-menu requires that a sounder device is installed on your site.
Device  Sounder  Parameter
Quick Keys Parameter

Parameters
Use this menu to define all parameters of the siren. Note that some
parameters are only relevant for specific siren models.
Select a sounder and press OK.
Device  Sounder  Parameter  Bus Sounders
Quick Keys Parameter

Label
As assign the sounder a label (description)

Masking
Use this menu to define parameters relating to masking
11/2017
Label
Serial No
Masking: Specifies the partitions that are controlled by the device.

Controls Panic Enable: Disable/enable panic alarm button
PIN code (for arming in high-security mode)
UO Key 1 Used to operate a single utility output
:
UO Key 2 Used to operate a single utility output
:
UO Key 3 Used to operate a single utility output
:
Default
Default
Default
Page 201
Range
Range
Range
5IN2413 B